Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

16.06.2025 02:28

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

What is lightning?

This is where this question deviates from being a 'generic' question, and becomes more specific.

An AC voltage/ current source, and an ac inductive load.

Why is the covert narcissist actively avoiding me when they see me everyday?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Upvotes:

But… the neutral is now “floating” because of the 1 ohm resistance.

When was you wife swapping fantasy started?

[old diagram got deleted by accident]

He then describes Rainy Season and Lightning.

He then asserts :

If you lived in South Africa, would you support nuclear power as a solution to the country's energy woes?

a photo is worth a thousand words.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The other is “what does a “fuse” do?”

Do empaths fall easier for abusive people?

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

The bolt then partially travels down the line to your home.

Why do I keep waking up at 4 AM?

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

One is “what exactly is in a ‘surge protector’ ? ”

What happened to The Simpsons deleted onscreen footage?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

For this case there are devices called Metal oxide varistors (MOV).

What are 10 interesting facts about you?

These are simplified answers to the original question, and does not change anything I wrote above.

This device then solves the entire problem.

One

Why are many women so drawn or attracted to men that have been or are currently in prison and men that are involved in street life/illegal activities?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Where to Watch Le Mans Live Stream 24-Hour Race Online for Free From Anywhere - Business Insider

There are two important concepts here.

2024–10–10[John johnson John Johnson ]

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What contributed to the popularity of The Beatles' song 'Yesterday'? Was it due to its simplicity, lyrics, or other factors?

First Sentence:

Because the load is inductive, the current lags the voltage.(by a bit).

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

but this device (an Inductor) … impedes the rapid changes in the current.

I post the exact comment here.

(Dc diagram shown, AC is similar).

nine

Barnstars:

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

There are three different concepts here that are getting confused.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

These devices are installed between the “hot” and “neutral” and protective ground.

It seems Mohan does not understand the difference between a comment and an Answer.

This is 'the assistant's answer'

At least they know the answer if they wanted it.

Now when you have a certain ac resistance, then a current flows in a loop.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

the problem then depends on "how fast does the fuse operate?".

This is where the MOV conducts again, and dissipated the energy.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

It also is a device that limits the change in current flow.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–16 [ OO OLAOYE OYEBODE ]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

The third is lightning and “how it gets conducted into a home.”

[image of Common-mode choke]

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

so, what happens?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Here is a simplified AC power diagram.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

eight

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

The MOV will conduct when the voltage exceeds 50% of line voltage.

In schematic diagrams this is the symbol for a fuse:

He then describes the function of a fuse.

but I think this circuit , shows a few more pieces.

What does a fuse do?

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This one hit behind the barn.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

A circuit breaker is similar, but is resettable.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

So, the voltage could go up to 500 volts, and the fuse will not open up.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

But it can get overloaded, and no longer works.

Edit 2024–10.

A fuse is a non-resetable over current circuit protector.